Medical Care |

Medical Care

##SEVER##

/m/motokanion.pl1.html

Chaque forme pharmaceutique présente ses propres avantages et inconvénients acheter du amoxil.

mais n'ont pas d'effets néfastes pour l'organisme dans son ensemble.

Manual_12000.indd

Lithium Jump Starter and DC Power Source
MODEL: IMF12000-12 Please read this instruction manual completely
before using this product.
Retain this instruction sheet for future reference.
SHIDO Jumpst w er w.
AFAM NV, Belgium. For more info abo P ut oSw HI eDr b O li yt: G hiu lmo bbaattl P e nvitsrita l I Add: San Gabriel, CA 91776 Lithium Jump Starter and DC Power Source
Power by: Global Power Central Inc Add: San Gabriel, CA 91776 1. WARNING
2. PRODUCT FEATURE
IMPORTANT!
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY,
AND OPERATE CORRECTLY ACCORDING TO INSTRUCTION.
WARNING!
NEVER ALLOW CLAMPS TO TOUCH TOGETHER OR
CONTACT THE SAME PIECE OF METAL.
◎ Do not charge the Jump Starter in dangerous places, such as near fuel, near fire etc.
◎ Do not expose the Jump Starter to the sun, rain or snow.
◎ Do not place the Jump Starter in microwave oven, pressurized container or vacuum chamber.
◎ Do not charge the Jump Starter with non-standard charger, use only specified charger equipped with Jump Starter.
◎ Do not immerse the Jump Starter in water or rinse by water, no waterproof design.
◎ Do not operate the jump starter if it has received a sharp blow, been dropped or otherwise damaged in any way.
◎ Do not attempt to disassemble, modify, knock and throw the 11. Oxford Bag (optional) product, please contact your local distributor if the product has any problem.
3. High Power LED Light 13. DC adaptor(cigarette charger) 4. Jumpstart Socket 14. 19V Switch Cable and Connectors for ◎ Never place the Jump Starter directly above battery being 5. JUMPSTART Button Tablet (optional) 6. POWER/LIGHT Button 15. 12V Switch Cable and Cigarette 7. USB DC 5V/2.1A Outlet Outlet (optional) ◎ Keep out of reach of Children.
8. DC 19V/3.5A Outlet (optional) 16. 5V Switch Cable and Connector for 9. DC 15V/1A Input Port Mobile (optional) 10. DC 12V/8A Outlet 17. Jump Cable and Clamps18. Low Temperature Trigger 1. WARNING
2. PRODUCT FEATURE
IMPORTANT!
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY,
AND OPERATE CORRECTLY ACCORDING TO INSTRUCTION.
WARNING!
NEVER ALLOW CLAMPS TO TOUCH TOGETHER OR
CONTACT THE SAME PIECE OF METAL.
◎ Do not charge the Jump Starter in dangerous places, such as near fuel, near fire etc.
◎ Do not expose the Jump Starter to the sun, rain or snow.
◎ Do not place the Jump Starter in microwave oven, pressurized container or vacuum chamber.
◎ Do not charge the Jump Starter with non-standard charger, use only specified charger equipped with Jump Starter.
◎ Do not immerse the Jump Starter in water or rinse by water, no waterproof design.
◎ Do not operate the jump starter if it has received a sharp blow, been dropped or otherwise damaged in any way.
◎ Do not attempt to disassemble, modify, knock and throw the 11. Oxford Bag (optional) product, please contact your local distributor if the product has any problem.
3. High Power LED Light 13. DC adaptor(cigarette charger) 4. Jumpstart Socket 14. 19V Switch Cable and Connectors for ◎ Never place the Jump Starter directly above battery being 5. JUMPSTART Button Tablet (optional) 6. POWER/LIGHT Button 15. 12V Switch Cable and Cigarette 7. USB DC 5V/2.1A Outlet Outlet (optional) ◎ Keep out of reach of Children.
8. DC 19V/3.5A Outlet (optional) 16. 5V Switch Cable and Connector for 9. DC 15V/1A Input Port Mobile (optional) 10. DC 12V/8A Outlet 17. Jump Cable and Clamps18. Low Temperature Trigger 3. OPERATING INSTRUCTION
◎ Please wait for 10 mins if several fail attempts, then start the vehicle again. ◎ If the vehicle couldn't be started within 5S, let the Jump starter cool for 3 mins before attempting to start the vehicle again, or you may damage the Jump Starter.
◎ Above the jumpstart function available when vehicle battery voltage between 1V 14.2V.
Press the <POWER/LIGHT> button to turn Connect the red clamp to positive(+) on the Jump Starter.
terminal and black clamp to negative(- LCD displays the internal battery status, It is recommended the battery capacity be over 60% for jumpstarting.
Plug the Jump cable into jump starter socket, the flashing <V> on LCD display the vehicle battery voltage Press <JUMPSTART> button, the Jumpstart After successfully starting, the Jump Starter symbol appears on LCD display will automatically stop the output, to avoid reverse charging. Two symbols repeatedly displayed indicates the internal battery and vehicle battery voltage Start the vehicle.(Turn off all electronic devices to ensure a successfully start) Press <POWER/LIGHT> button for 3S to Disconnect Red and Black clamps from the turn off the Jump Starter, and remove the battery terminals.
jump cable from the Jump Starter.
Recharge the Jump Starter as soon as 3. OPERATING INSTRUCTION
◎ Please wait for 10 mins if several fail attempts, then start the vehicle again. ◎ If the vehicle couldn't be started within 5S, let the Jump starter cool for 3 mins before attempting to start the vehicle again, or you may damage the Jump Starter.
◎ Above the jumpstart function available when vehicle battery voltage between 1V 14.2V.
Press the <POWER/LIGHT> button to turn Connect the red clamp to positive(+) on the Jump Starter.
terminal and black clamp to negative(- LCD displays the internal battery status, It is recommended the battery capacity be over 60% for jumpstarting.
Plug the Jump cable into jump starter socket, the flashing <V> on LCD display the vehicle battery voltage Press <JUMPSTART> button, the Jumpstart After successfully starting, the Jump Starter symbol appears on LCD display will automatically stop the output, to avoid reverse charging. Two symbols repeatedly displayed indicates the internal battery and vehicle battery voltage Start the vehicle.(Turn off all electronic devices to ensure a successfully start) Press <POWER/LIGHT> button for 3S to Disconnect Red and Black clamps from the turn off the Jump Starter, and remove the battery terminals.
jump cable from the Jump Starter.
Recharge the Jump Starter as soon as 3.4 USING DC 12V/8A OUTLET
The Jump Starter is also a DC power source for all DC devices that are 4. CHARGING THE INTERNAL BATTERY
equipped with a Cigarette plug.
1. Make sure the device to be charged is OFF before inserting the Cigarette IMPORTANT!
plug into the Cigarette outlet.
CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND
2. Press <POWER/LIGHT> button to turn on the Jump Starter.
EVERY 6 MONTHS, ALWAYS KEEP THE INTERNAL BATTERY FULLY
3. Plug the Cigarette outlet cable into the Jump Starter's 12V outlet.
4. Plug your device into Cigarette outlet and turn on the device (if required).
Charged by AC charger Charged by DC adaptor (Cigarette charger) 5. When finished, turn off the device (if required) and disconnect the device.
6. Press the <POWER/LIGHT> button for 3S to turn off the Jump Starter or wait for 2 mins then the Jump Starter will shut down automatically. 7. Recharge the Jump Starter immediately after unplugging the device.
◎ Plug the AC charger into Jump starter's ◎ Plug the DC adaptor into Jump starter's ◎ Connect the AC charger to a 100 240VAC ◎ Connect the DC adaptor to the vehicle's 3.5 USING DC 19V/3.5A OUTLET
electrical wall outlet, LCD displays cigarette outlet, LCD displays The Jump Starter is also a DC power source for all DC devices that are equipped with a 19V accessory plug.
◎ <CHARGING> disappears on LCD when ◎ <CHARGING> disappears on LCD when the internal battery fully charged, Jump the internal battery fully charged, Jump 1. Make sure the device to be charged is OFF before inserting the 19V Starter will stop charging circuit Starter will stop charging circuit accessory plug into the DC 19V/3.5A outlet.
◎ Disconnect the AC charger from the AC ◎ Disconnect the DC adaptor from the 2. Press <POWER/LIGHT> button to turn on the Jump Starter.
outlet, and then unplug the AC charger from cigarette outlet, and then unplug the DC 3. Plug the switch cable into the Jump Starter's 19V outlet.
the Jump Starter.
adaptor from the Jump Starter.
4. Plug the other (Choose the proper plug for your device) end of the cable into your device. Turn the device on, if necessary.
finished, turn off the device (if necessary) and unplug the device. 6. Press the <POWER/LIGHT> for 3S to turn off the unit or wait for 2 mins then the Jump Starter will shut down automatically.
5. MAINTENANCE AND CARE
echarge the Jump Starter immediately after unplugging the device.
The Maximum output power of the 5V, 12V and 19V is 120W totally, the socket output will shut down automatically if the power of the device is over 120W.
Electrical devices must be removed first, or the Jump Starter can not shut down 3.6 USING HIGH POWER LIGHT
1. Press <POWER/LIGHT> button to turn on the Jump Starter.
2. Quick press <POWER/LIGHT> button to switch three different LED light First: Highlight; Second: strobe; Third: SOS; Fourth: Off 3. Press <POWER/LIGHT> for 3S to turn off, or wait for 2 mins then the Jump Starter will shut down automatically.
3.4 USING DC 12V/8A OUTLET
The Jump Starter is also a DC power source for all DC devices that are 4. CHARGING THE INTERNAL BATTERY
equipped with a Cigarette plug.
1. Make sure the device to be charged is OFF before inserting the Cigarette IMPORTANT!
plug into the Cigarette outlet.
CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND
2. Press <POWER/LIGHT> button to turn on the Jump Starter.
EVERY 6 MONTHS, ALWAYS KEEP THE INTERNAL BATTERY FULLY
3. Plug the Cigarette outlet cable into the Jump Starter's 12V outlet.
4. Plug your device into Cigarette outlet and turn on the device (if required).
Charged by AC charger Charged by DC adaptor (Cigarette charger) 5. When finished, turn off the device (if required) and disconnect the device.
6. Press the <POWER/LIGHT> button for 3S to turn off the Jump Starter or wait for 2 mins then the Jump Starter will shut down automatically. 7. Recharge the Jump Starter immediately after unplugging the device.
◎ Plug the AC charger into Jump starter's ◎ Plug the DC adaptor into Jump starter's ◎ Connect the AC charger to a 100 240VAC ◎ Connect the DC adaptor to the vehicle's 3.5 USING DC 19V/3.5A OUTLET
electrical wall outlet, LCD displays cigarette outlet, LCD displays The Jump Starter is also a DC power source for all DC devices that are equipped with a 19V accessory plug.
◎ <CHARGING> disappears on LCD when ◎ <CHARGING> disappears on LCD when the internal battery fully charged, Jump the internal battery fully charged, Jump 1. Make sure the device to be charged is OFF before inserting the 19V Starter will stop charging circuit Starter will stop charging circuit accessory plug into the DC 19V/3.5A outlet.
◎ Disconnect the AC charger from the AC ◎ Disconnect the DC adaptor from the 2. Press <POWER/LIGHT> button to turn on the Jump Starter.
outlet, and then unplug the AC charger from cigarette outlet, and then unplug the DC 3. Plug the switch cable into the Jump Starter's 19V outlet.
the Jump Starter.
adaptor from the Jump Starter.
4. Plug the other (Choose the proper plug for your device) end of the cable into your device. Turn the device on, if necessary.
finished, turn off the device (if necessary) and unplug the device. 6. Press the <POWER/LIGHT> for 3S to turn off the unit or wait for 2 mins then the Jump Starter will shut down automatically.
5. MAINTENANCE AND CARE
echarge the Jump Starter immediately after unplugging the device.
The Maximum output power of the 5V, 12V and 19V is 120W totally, the socket output will shut down automatically if the power of the device is over 120W.
Electrical devices must be removed first, or the Jump Starter can not shut down 3.6 USING HIGH POWER LIGHT
1. Press <POWER/LIGHT> button to turn on the Jump Starter.
2. Quick press <POWER/LIGHT> button to switch three different LED light First: Highlight; Second: strobe; Third: SOS; Fourth: Off 3. Press <POWER/LIGHT> for 3S to turn off, or wait for 2 mins then the Jump Starter will shut down automatically.
NON-STOP beeping The Vehicle battery Make sure the vehicle to be jumpstarted soundwhen connecting voltage is too high must be on 12V system the vehicle battery "F01"displayed on Non-stop 8 seconds 1) Quick press <JUMPSTART> button to Polarity connections is Disconnect the Jump Starter and reverse flashing background cranking, the Jump resume the Jump Starter, then press this beeping sound when LCD together with Starter has gone into button again to ready the jumpstart connecting the vehicle 2) Or choose waiting for 2 minutes till Jump Starter automatically shut down or press <POWER/LIGHT> button for 3 Seconds to turn off it; Then turn on the Jump Starter via 10 times beeping and The internal battery Check the internal battery capacity and pressing <POWER/LIGHT> button the Jump Starter shut voltage has gone too recharge it if necessary 3) Make sure the Jump Starter is on proper down automatically low, the Jump Starter state before attempting to operate again when charging 5V, 12V discharged protection "F02"displayed on The internal battery 1) Quick press <JUMPSTART> button to flashing background voltage has gone too resume the Jump Starter, then press this The vehicle can not be 1) Improper clamp 1) Check and make sure the connections is LCD together with low, the Jump Starter button again to ready the jumpstart has gone into over- 2) The internal battery 2) Check the internal battery capacity and discharged protection 2) Or choose waiting for 2 minutes till Jump capacity is too low recharge it if necessary Starter automatically shut down or press 3) Too low outside 3) LCD display <##F> and goes into LOW <POWER/LIGHT> button for 3 Seconds to TEMPERATURE MODE (see 3.2) turn off it; Then turn on the Jump Starter via 4) Too high outside 4) Jump Starter goes into High temperature pressing <POWER/LIGHT> button protection, cool down the unit before 3) Make sure the Jump Starter is on proper 5) Vehicle battery is state before attempting to operate again totally defective 5) Check the vehicle battery and change it if "F03" and flashing The internal battery 1) Waiting for 2 minutes till Jump Starter symbol displayed on temperature has gone automatically shut down or press The device can not be 1) Improper clamp 1) Check and make sure the connections flashing background too high, the Jump <POWER/LIGHT> button for 3 Seconds to LCD together with Starter has gone into 2) The switch cable and 2) Change a new switch cable and over-temperature mode 2) Cool down the Jump Starter connectors are defective connectors 3) Turn on the Jump Starter via pressing 3) The internal battery 3) Check the internal battery capacity and capacity is too low recharge it if necessary Note: Jumpstart function will not be available till internal battery temperature Can not turn on the The internal battery Check the internal battery capacity and capacity is too low recharge it if necessary. "F04"displayed on The device of 12V or 19V 1) Make sure the device to be powered is flashing background to be charged is over The low temperature Unplug the low temperature trigger from the LCD & beeping 5 times, 120W, the Jump Starter 2) Turn on the Jump Starter via pressing successfully started in trigger does not unplug the Jump Starter shut has gone into over-load <POWER/LIGHT> button down when charging 12V or 19V device NON-STOP beeping The Vehicle battery Make sure the vehicle to be jumpstarted soundwhen connecting voltage is too high must be on 12V system the vehicle battery "F01"displayed on Non-stop 8 seconds 1) Quick press <JUMPSTART> button to Polarity connections is Disconnect the Jump Starter and reverse flashing background cranking, the Jump resume the Jump Starter, then press this beeping sound when LCD together with Starter has gone into button again to ready the jumpstart connecting the vehicle 2) Or choose waiting for 2 minutes till Jump Starter automatically shut down or press <POWER/LIGHT> button for 3 Seconds to turn off it; Then turn on the Jump Starter via 10 times beeping and The internal battery Check the internal battery capacity and pressing <POWER/LIGHT> button the Jump Starter shut voltage has gone too recharge it if necessary 3) Make sure the Jump Starter is on proper down automatically low, the Jump Starter state before attempting to operate again when charging 5V, 12V discharged protection "F02"displayed on The internal battery 1) Quick press <JUMPSTART> button to flashing background voltage has gone too resume the Jump Starter, then press this The vehicle can not be 1) Improper clamp 1) Check and make sure the connections is LCD together with low, the Jump Starter button again to ready the jumpstart has gone into over- 2) The internal battery 2) Check the internal battery capacity and discharged protection 2) Or choose waiting for 2 minutes till Jump capacity is too low recharge it if necessary Starter automatically shut down or press 3) Too low outside 3) LCD display <##F> and goes into LOW <POWER/LIGHT> button for 3 Seconds to TEMPERATURE MODE (see 3.2) turn off it; Then turn on the Jump Starter via 4) Too high outside 4) Jump Starter goes into High temperature pressing <POWER/LIGHT> button protection, cool down the unit before 3) Make sure the Jump Starter is on proper 5) Vehicle battery is state before attempting to operate again totally defective 5) Check the vehicle battery and change it if "F03" and flashing The internal battery 1) Waiting for 2 minutes till Jump Starter symbol displayed on temperature has gone automatically shut down or press The device can not be 1) Improper clamp 1) Check and make sure the connections flashing background too high, the Jump <POWER/LIGHT> button for 3 Seconds to LCD together with Starter has gone into 2) The switch cable and 2) Change a new switch cable and over-temperature mode 2) Cool down the Jump Starter connectors are defective connectors 3) Turn on the Jump Starter via pressing 3) The internal battery 3) Check the internal battery capacity and capacity is too low recharge it if necessary Note: Jumpstart function will not be available till internal battery temperature Can not turn on the The internal battery Check the internal battery capacity and capacity is too low recharge it if necessary. "F04"displayed on The device of 12V or 19V 1) Make sure the device to be powered is flashing background to be charged is over The low temperature Unplug the low temperature trigger from the LCD & beeping 5 times, 120W, the Jump Starter 2) Turn on the Jump Starter via pressing successfully started in trigger does not unplug the Jump Starter shut has gone into over-load <POWER/LIGHT> button down when charging 12V or 19V device 8. SYMBOL MESSAGES
8. SYMBOL MESSAGES 12V 36Wh Lithium Iron Battery Multi-function LCD displays all kinds of working condition and vehicle
15V/1.0A AC charger and DC adaptor (Cigarette charger) USB DC 5V/2.1A (Max 2.5A) The internal battery charge status DC 12V/8.0A Outlet (With 120W overload protection) DC 19V/3.5A Outlet (With 120W overload protection) The vehicle battery voltage Cranking Amps: 300A Peak Amps: 600 A Solid Jumpstart symbol indicates Jumpstart function High Power LED (1W 90LM) Size and length of Red: 10AWG/12.52"(31.8cm) Jump Сable and Сlamps <CHARGING> symbol indicates Jump Starter is on Suggest goes into LOW TEMPERATURE MODE, XX The dimension of mean temperature of the Jump Starter After successfully starting, two symbols repeatedly displayed indicates the internal Operating temperature 32℉ 140℉ (0℃-60℃) battery and vehicle battery voltage Operating temperature -4℉ 140℉ (-20℃-60℃) (w/ Low Temp. Trigger) Error symbols; See Troubleshooting Against-reverse Plug Overdischarge Protection


8. SYMBOL MESSAGES
8. SYMBOL MESSAGES 12V 36Wh Lithium Iron Battery Multi-function LCD displays all kinds of working condition and vehicle
15V/1.0A AC charger and DC adaptor (Cigarette charger) USB DC 5V/2.1A (Max 2.5A) The internal battery charge status DC 12V/8.0A Outlet (With 120W overload protection) DC 19V/3.5A Outlet (With 120W overload protection) The vehicle battery voltage Cranking Amps: 300A Peak Amps: 600 A Solid Jumpstart symbol indicates Jumpstart function High Power LED (1W 90LM) Size and length of Red: 10AWG/12.52"(31.8cm) Jump Сable and Сlamps <CHARGING> symbol indicates Jump Starter is on Suggest goes into LOW TEMPERATURE MODE, XX The dimension of mean temperature of the Jump Starter After successfully starting, two symbols repeatedly displayed indicates the internal Operating temperature 32℉ 140℉ (0℃-60℃) battery and vehicle battery voltage Operating temperature -4℉ 140℉ (-20℃-60℃) (w/ Low Temp. Trigger) Error symbols; See Troubleshooting Against-reverse Plug Overdischarge Protection

Source: http://motokanion.pl/pl/p/file/2385766b35d424fe449430b395be3f72/instrukcja_imf12000.pdf

Hidden devices in the school setting

in the School Setting Types of devices • Vagus nerve stimulator • Baclofen pump • Implantable defibrillator • Vascular devices • Shunt • Transcutaneous electrical nerve stimulation • Electrical muscle stimulator • Diaphragmatic pacer Vagus Nerve Stimulator Vagus Nerve Stimulator • This device is implanted under the left chest. A second incision, made along the

P18-21 jul 30 ktn/snapshot y

18 Pulse 30 July 2008 diagnosisAnnular rash on 24Ten top tips A GPSI's guide tonew osteoporosis medicine crammerWhat helps the glans prevent migraine underlying causes and investigate further for neuromuscular disorders of the gut. If delayed GI motility is identified I often useprokinetics, probiotics and sometimes